3
3.9.1
Table 3.8 Concentric wall flue terminal specifications
Specification
Manufacturer
Model
Pipe material, flue gas discharge
Pipe material, air intake
Pipe diameter
1.
The M2000 MDV SE model is a special version of the Mugro 3000 series. No other wall flue terminal may be used, as the
BFC-appliance is approved exclusively for this model of wall flue terminal. You can order the wall flue terminal from A.O. Smith or your
trade supplier, by specifying model: M2000 MDV SE.
28
Installation
Concentric wall flue terminal
Table 3.8
shows the wall flue terminal prescribed by A.O. Smith (installation
type C13).
A
Figure 3.4 Wall flue terminal
Description
Muelink & Grol
M2000 MDV SE
Thick-walled aluminium with lip ring seal
Thin-walled galvanised sheet steel
Concentric
•
BFC 28: Ø 80/125 mm.
•
BFC 30, 50 and 60: Ø 100/150 mm.
B
(1)
Instruction Manual BFC
is
IMD-0075