Section 3: Configuration
This page allows you to install and activate an HTTPS certificate for secure access to your camera. After making any changes, click the Save Settings
button to save your changes.
Enable
Enable the HTTPS service.
HTTPS Secure
Connection:
Create
Choose the way the certificate should be created. Three options are
Certificate
available:
Method:
• Create a self-signed certificate automatically
• Create a self-signed certificate manually
• Create a certificate request and install
Status:
Displays the status of the certificate.
Note:
The certificate cannot be removed while HTTPS is still enabled. To remove
the certificate, you must first uncheck Enable HTTPS secure connection.
D-Link DCS-4703E User Manual
HTTPS
43