Voice Guide; Number Of Rings - AT&T EL52145 Quick Start Manual

Voice guide

This feature is an alternative way for you to do the basic setup of the answering system.
You can follow the voice guide to record your own announcement, set the number of
rings, and set the message alert tone.
This feature is only available on the cordless handset.
1. On a handset, press
2. Press or
3. Press or
a voice prompt, "Hello! This voice guide will assist you with the basic setup of your
answering system."
4. Setup your answering system by inputting designated numbers, as instructed in the
voice guide.
NOTE: You can press

Number of rings

You can set the answering system to answer an incoming call after 6, 5, 4, 3, or 2 rings.
You can also select Toll saver. If toll saver is selected, the answering system answers a
call after two rings when you have new messages, and after four rings when there are
no new messages. This feature allows you to check for new messages and avoid paying
long distance charges if you are calling from out of your local area. Unless you change it,
the answering system answers an incoming call after 3 rings.
To set the number of rings:
1. On a handset, press
2. Press or
3. Press or
4. Press or
5. Press or
Toll saver.
6. Press
NOTE: If you have muted the first ring, you will hear one ring less before the answering system
answers the incoming calls.
to scroll to Answering sys, then press
to scroll to Voice guide, then press
to scroll to Answering sys, then press
.
to scroll to Ans sys setup, then press
.
to scroll to # of rings, then press
.
to scroll and choose among 6, 5, 4, 3, 2 or
to save.
in idle mode.
to quite the voice guide at any time.
in idle mode.
23
.
. You hear
# of rings
ECO
3
ECO