First Use - Smeg SO4604S4PNR Manual

etc...
Lower area
There are various shortcut function buttons in this
area, which vary according to the functions set
in the main area:
MULTISTEP
HISTORY
TIMER
LIGHT BULB
MY RECIPES
SETTINGS
According to the page that is displayed, the
following buttons may also be present:
BACK
CONFIRM
START
REPLAY
STOP
SAVE
DELETE
RAPID PRE-HEATING
PROBE (on some models only)
Press and hold the HOME
or the ON-OFF
seconds to stop cooking immediately at
any time and return to the main menu.
Connectivity (on some models only)
Connectivity requirements:
• Smartphone or PC tablet with IOS or
Android operating system. The minimum
versions of the operating systems are
available at the following link:
www.smeg.com/smegconnect/
• Wi-Fi network (2.4 GHz band, WPA2
78 - USE
button
button for a few
protected) active and available in the
place where the appliance is installed.
• Internet connection.
• Name and password of the home Wi-Fi
network or WPS (Wi-Fi Protected Setup)
mode available.
For further information, please refer to the
"Built-in oven connectivity" manual.

First use

The following instructions are also valid
in the case of a prolonged power
failure.
To switch on the appliance:
1. Connect the appliance to the mains power
supply.
The manufacturer's logo will display for a few
seconds.
After the appliance is switched on, you
will need to wait a few seconds before
you can use it.
The display then shows the current time setting
screen.
To be able to start any cooking function, the
current time must be set.
2. Scroll up and down through the hours and
minutes to set the current time.
3. Touch the CONFIRM
right in the lower area
current time.
To change the current time (e.g. due to
daylight saving time) touch the time
shown on the display (in the information
area on the right).
button (at the
) to set the
91477A485/A