Page 2
SWPZ01-RX USER MANUAL Thank your purchasing this product This product is applied as following 2.4GHz IEEE 802.15.4 [ZIGBEE] This is ZIGBEE Radio Receiver module for Remote Control and in pair with Remote controller 1. Set up guide (1) Connect 10PIN CABLE as follow Figure 1-1) Figure 1-1) CABLE Connecting (2) Be built in TV MONITOR as follow Figure 1-2).
Page 3
SWPZ01-RX USER MANUAL (3) Pairing with SWPZ01-TX RF Remote Controller. 2) Power on TV 1) Push Pairing button 3) Pairing Completed (Please use main power button) - Caution for Pairing Mode - Make close RF remote controller to TV (about 30cm) when pairing...
Page 4
SWPZ01-RX USER MANUAL ▣ Pin Descriptions Terminal NAME Inter face Description DC 3.0V Power supply 3.0V_in Power RESETB Digital Reset (Active Low) UART TXD1 Power UART TX INPUT Ground Ground UART RXD1 Digital UART TX OUTPUT PWR DECT Digital POWER DECTER OUTPUT...
SWPZ01-RX USER MANUAL FCC Compliance Information This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received including interference that may cause undesired operation.
Page 6
SWPZ01-RX USER MANUAL Caution Changes or modifications not expressly approved by the party responsible for compliance could void the us er’s authority to operate the equipment. Spec. Type of device: RF Receiver Frequency bands: 2405 MHz ~ 2480 MHz Channel space: 5 MHz...