Table of Contents
Advertisement
Projector Parts and Functions
Name
Function
[Home] button
Displays and closes the Home screen.
V
Hold down this button for more than 5 seconds to lock
or unlock the remote control buttons.
[Num] button
Hold down this button to enter numbers using the
W
numeric buttons.
[Geometry] button
Displays the Geometry Correction screen allowing you
X
to correct keystone distortion of the projected image.
[Memory] button
Displays the Memory screen where you can save
Y
customized settings and load saved settings. A memory
name that has already been used is indicated by a blue
mark. Saving over a previously saved memory
overwrites the settings with your current settings.
[E-Zoom] +/–
Resizes the projected image without changing the
Z
buttons
projection size.
This feature is unavailable if the Scale setting is enabled
in the projector's menu.
s Signal > Scale
s Extended > Multi-Projection > Scale
[Default] button
Returns the selected setting to its default value.
a
Hold down this button for more than 3 seconds to start
the lens calibration process.
[Esc] button
Stops the current function.
b
Moves back to the previous menu level while
displaying the projector's menu.
[Focus] button
Displays the screen where you can adjust the focus and
c
distortion in the projected image.
Name
Function
[Split] button
Projects two images from different image sources
d
simultaneously by splitting the projected screen.
While using the split screen feature, other projector
features may not be available and some settings may be
automatically applied to all images.
You cannot perform split screen projection when the
Content Playback setting is set to On in the projector's
Settings menu.
Some input source combinations are not supported for
split screen projection.
[Color Mode] button
Changes the color mode.
e
[Search] button
Switches to the next input source.
f
Illumination button
Illuminates the buttons on the remote control for
g
approximately 15 seconds. This is useful when using
[
]
the remote control in the dark.
Indicator
A light is emitted when outputting remote control
h
signals.
Remote control light
Outputs remote control signals.
i
emitting area
g g Related Links
• "Installing Batteries in the Remote Control"
• "Remote Control Operation"
p.23
• "Locking the Remote Control Buttons"
• "Password Protection"
p.66
• "Test Pattern"
p.57
• "A/V Mute"
p.55
• "Shutter"
p.56
• "Home Screen"
p.50
• "Geometry Correction"
p.81
• "Memory"
p.87
• "Split Screen"
p.82
22
p.23
p.24
Advertisement
Table of Contents
