Maintenance - Stanley FATMAX SFMCW221B Manual

ENGLISH
To reduce the risk of injury, only STANLEY FATMAX
recommended accessories should be used with this product.

Maintenance

Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance, switch off and
unplug the tool.
Regularly clean the ventilation slots in your tool using a
u
soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Z
Protecting the environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with
normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
Further information is available at
www.2helpU.com
Technical data
Input voltage
Oscillations (no load) min
Orbits (no load) min
Paper size mm
Weight
Charger SFMCB11
Input Voltage
V
AC
Output Voltage
V
DC
Current A
SFMCB201
Battery
18
Voltage V
DC
1.5
Capacity Ah
Li-Ion
Type
Level of sound pressure according to EN62841:
Sound pressure (L ) 74.5 dB(A), Uncertainty (K) 3 dB(A)
pA
Sound power (L ) 85.5 dB(A), Uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN62841:
Sanding (a ) 7.8 m/s , uncertainty (K) 1.5 m/s
2
h
10
(Original instructions)
SFMCW221
V
dc
9000 - 12000
-1
9000 - 12000
-1
kg
SFMCB12 SFMCB14
230 230
18 18
1.25 2
SFMCB202 SFMCB204 SFMCB206
18 18
2.0 4.0
Li-Ion Li-Ion
2
Declaration of Conformity
The Supply of Machinery (Safety) Regulations 2008
STANLEY FATMAX declares that these products described
under "technical data" are in compliance with:
Equipment Regulations 2012, S.I. 2012/3032 (as amended).
EN62841-1:2015; EN62841-2-4:2014.
These products conform to the following UK Regulations:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
Electromagnetic Compatibility Regulations, 2016,
The Restriction of the Use of Certain Hazardous Substances
For more information, please contact Stanley at the following
address or refer to the back of the manual.
The undersigned is responsible for compilation of the techni-
cal file and makes this declaration on behalf of STANLEY
18
135 x 95
0.93
EC declaration of conformity
230
18
4
18
STANLEY FATMAX declares that these products described
6.0
under "technical data" are in compliance with:
2006/42/EC, EN62841-1:2015; EN62841-2-4:2014.
Li-Ion
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact STANLEY
FATMAX at the following address or refer to the back of
SFMCW221 Detail sander
2008/1597 (as amended).
S.I.2016/1091 (as amended).
in Electrical and Electronic
FATMAX
Vice President Professional Power Tools EANZ
STANLEY FATMAX, 270 Bath Road, Slough,
%
MACHINERY DIRECTIVE
SFMCW221 Detail sander
the manual.
Karl Evans
Berkshire, SL1 4DX
United Kingdom
31/08/2021