Adjusting The Image And Audio Settings - Sony DHC-AZ1D Operating Instructions Manual

Adjusting the image and
audio settings
— AV
1
Press
The Setup Display appears.
2
Press < or , repeatedly to select
"AV," then press ENTER.
3
Press M or m repeatedly to select an
item, then press ENTER.
4
Press M or m repeatedly to select a
setting, then press ENTER.
5
Press
Display.
x TV Type
Select the aspect ratio of the connected TV.
The default setting varies, depending on the
country model.
4:3 Pan Scan Select this when you connect a 4:3
screen TV. This setting displays the
wide picture on the entire screen and
cuts off the portions that do not fit.
4:3 Letter Select this when you connect a 4:3
Box screen TV. This setting displays a wide
picture with bands displayed on the
upper and lower portions of the screen.
16:9 Select this when you connect a wide-
screen TV or a TV with a wide mode
function.
• 4:3 Pan Scan
• 4:3 Letter Box
• 16:9
22 GB
DISPLAY in stop mode.
DISPLAY to turn off the Setup
Note
Depending on the DVD, "4:3 Letter Box" may be
selected automatically instead of "4:3 Pan Scan" or
vice versa.
x VCD Color Sys (Asian models only)
Select the color system when you play a VIDEO
CD. The default setting is underlined.
Auto Outputs the video signal in the
system of the disc, either PAL or
NTSC. If your TV uses a dual
system, select "Auto."
NTSC Changes the video signal of a PAL
disc and outputs it in the NTSC
system.
PAL Changes the video signal of an
NTSC disc and outputs it in the
PAL system.
x Dolby Digital
Set the Dolby Digital settings to enjoy 5.1
channel sound when an optional amplifier is
connected (see "Enjoying the 5.1 channel sound
with the optional amplifier" (page 43)).
x DTS
Set the DTS settings to enjoy 5.1 channel sound
when an optional amplifier is connected (see
"Enjoying the 5.1 channel sound with the
optional amplifier" (page 43)).
x Data CD Priority (MP3, JPEG only)
Set priority data you want to play, when you
play the data disc (CD-ROM/CD-R/CD-RW)
containing MP3 audio tracks and JPEG image
files. When you change this setting, eject and
reload the disc.
The default setting is underlined.
MP3 If an MP3 file exists on the disc,
the system recognizes the disc as
an MP3 Disc. If only JPEG files
exist on the disc, the system
recognizes the disc as a JPEG
Disc.
JPEG If a JPEG file exists on the disc,
the system recognizes the disc as a
JPEG Disc. If only MP3 files exist
on the disc, the system recognizes
the disc as an MP3 Disc.