BenQ LU935 User Manual page 46

Returns all settings to the factory preset values.
Factory
The following settings will still remain: 2D Keystone, Auto Vertical Keystone, Corner Fit,
Default
Projector Installation, Light Usage Time, High Altitude Mode, Security Settings, Baud
Rate, Corner Fit, Digital Shrink & Shift, Digital Lens Shift, Network, HDMI Equalizer,
Display Resolution Switch, Dynamic Dimming,Custom Brightness.
Returns all of the adjustments you've made for the System menu to the factory
Reset System
preset values.
Information
• Native
• Detected Resolution: Shows the native resolution of the input signal.
• Source: Shows the current signal source.
• Picture Mode: Shows the selected mode in the Picture menu.
• Light Mode: Shows the selected mode in the Light Settingsmenu.
Information • 3D Format: Shows the current 3D mode.
• Color System: Shows input system format.
• Light Usage Time: Shows the number of hours the light source has been used.
• Projector ID: Shows projector ID of the projector.
• Firmware Version: Shows the firmware version of your projector.
• Service Code: Shows the serial number of the projector.
46 Menu operation
Resolution: Shows the native resolution of the projector.