• Press
/
Adjusting Corner Fit
You can manually adjust four corners of the image by setting the horizontal and vertical values.
1. Do one of the following steps to display the corner fit correction page.
• Press QUICK INSTALL on the remote control. Press
press OK.
• Go to Advanced Menu - Display > Corner Fit and press OK.
2. Press
/ / /
3. Press
/
4. Press
/
18
Positioning your projector
to disable the auto vertical keystone function.
to select one corner and press OK.
to adjust vertical values.
to adjust horizontal values.
Exit
Corner Fit
Press to reset corner value
to highlight Corner Fit and