Table of Contents
Advertisement
• Port Selection: Allows you to select a preferred control port: through the
RS-232C port (RS232 port on the projector) or the HDBaseT port (HDBaseT
input port on the projector).
Serial Port
Setting
• Baud
can connect the projector using a suitable RS-232 cable. This function is intended
for qualified service personnel.
Adjusts the equalizer gain settings for an HDMI signal. The higher the setting, the
HDMI
stronger the gain value. If there are more than one HDMI port on the projector,
Equalizer
select the HDMI port first before adjusting the value.
• Save Image Memory: Allows you to save and apply several sets of image
settings for regularly used circumstances, including the following settings:
Projector Installation, Aspect Ratio, Picture Mode, Source, Resolution,
Light Source Mode, Digital Shrink & Shift, Blanking. You can choose one
Image
set of memory to save the current settings.
Memory
• Apply Image Memory: After the image memories are saved, you can decide if
you would like to apply it by choosing a set of memory that you have saved.
• Rename: Renames the image memories.
Returns all of the adjustments you've made for the Settings menu to the factory
Reset Settings
preset values.
System
Language
Sets the language for the On-Screen Display (OSD) menus.
• Standby Mode
Standby
• Auto Disable Network Standby Mode: Allows the projector to disable the
Settings
network function after a set period of time after it enters standby mode. For
instance, if 20 min is selected, the projector is able to provide the network
function for 20 minutes after it enters standby mode. When 20 minutes is up, the
projector enters normal standby mode.
• Audio Pass Through: The projector can play sound when it is in standby mode
and the corresponding jacks are correctly connected to devices. Press
choose the source that you wish to use. See
make the connection.
•
Background
• Splash
Settings
projector start-up.
• Menu Type: Switches to the Basic OSD menu.
Menu Settings
• Menu Display Time: Sets the length of time the OSD will remain active after
your last key press.
44
Menu operation
Rate:
Selects a baud rate that is identical with your computer's so that you
• ECO: The projector maintains at normal standby mode with less than 0.5W
power consumption.
• Network: The projector maintains at network standby mode with less than
2W power consumption.
• Normal: Allows the projector to provide network, monitor out and audio
pass through functions in standby mode.
Background:
Sets the background color for the projector.
Screen:
Allows you to select which logo screen will be displayed during
Connection on page 19
/
to
for how to
Advertisement
Table of Contents
