Jumper Setup - ASROCK B550D4M User Manual

2.7 Jumper Setup

The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is "Short". If no jumper cap is placed on the pins, the jumper
is "Open". The illustration shows a 3-pin jumper whose pin1 and pin2 are "Short"
when a jumper cap is placed on these 2 pins.
NCSI Mode Jumper
(3-pin NCSI_SEL1)
(see p.7, No. 33)
24
NCSI is set to onboard
LAN1 (Default)
NCSI is set to Mezzanine
Card