Table of Contents
Advertisement
OPERATION
1.
After engine starts, allow it to
return to idle and warm up before
using.
2.
Move chain brake lever fully
REARWARD to UNLOCK chain
brake.
3.
Squeeze throttle trigger (B)
gradually and increase engine
speed.
4.
The chain starts running when
the engine reaches clutch
engagement speed (see
technical data page).
5.
Confirm proper acceleration and
lubrication of chain and bar.
6.
Do not run the engine at high speed unnecessarily.
7.
Be sure that saw chain stops moving when throttle trigger is released.
Stopping
1.
Release throttle trigger (B) and
allow engine to idle.
2.
Move ignition switch (A) DOWN
to "STOP" position.
Note: If engine does not stop,
pull choke control knob
out fully to stop engine.
Return the unit to your
authorized dealer to check
and repair stop switch before starting the engine again.
34
Shown with Optional
Unlock Chain brake
A
© 09/19 ECHO Incorporated
402S
TM
Kick Guard
B
B
X7503256302
Advertisement
Table of Contents
