Safety Precautions - Panasonic TH-75BQE1 Operating Instructions Manual

IMPORTANT: THE MOULDED PLUG
FOR YOUR SAFETY, PLEASE READ THE
FOLLOWING TEXT CAREFULLY.
This display is supplied with a moulded three pin
mains plug for your safety and convenience. A 10
amp fuse is fitted in this plug. Shall the fuse need to
be replaced, please ensure that the replacement fuse
has a rating of 10 amps and that it is approved by
ASTA or BSI to BS1362.
Check for the ASTA mark
the body of the fuse.
If the plug contains a removable fuse cover, you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used
until a replacement cover is obtained.
A replacement fuse cover can be purchased from
your local Panasonic dealer.
Do not cut off the mains plug.
Do not use any other type of mains lead except the
one supplied with this display.
The supplied mains lead and moulded plug are
designed to be used with this display to avoid
interference and for your safety.
If the socket outlet in your home is not suitable, get it
changed by a qualified electrician.
If the plug or mains lead becomes damaged,
purchase a replacement from an authorized dealer.
WARNING : — THIS DISPLAY MUST BE EARTHED.
How to replace the fuse.
Open the fuse compartment with a screwdriver and
replace the fuse.
or the BSI mark on

Safety Precautions

WARNING
■
Setup
This LCD Display is for use only with the following
optional accessory.
Use with any other type of optional accessories may
cause instability which could result in the possibility
of injury.
(The following accessory is manufactured by Panasonic
Corporation.)
Please firmly install the Pedestal sold separately.
Installation should be done by a professional vendor.
Work in a team of 4 persons when installing.
Pedestal
TY-ST75PE9
•
Note
●
When installing the Pedestal, thoroughly read the
instructions manual included with the product and
correctly install the stand. Make sure to take the fall-
prevention measures.
●
For ensuring safety and performance, ask your
distributor or a professional vendor to carry out the
installation work.
●
Please note that we will not be responsible for any
product damage that happens due to defects in the
installation environment of stand or wall-mounting
clasp even if it is within the warranty period.
● For the products that you are no longer using, ask
a professional contractor to promptly remove such
products.
●
When installing, "crack in LCD panel" may occur
because of impact etc. Therefore, please carefully
handle the product.
●
The part numbers of optional items are subject to
change without notice.
We are not responsible for any product damage, etc.
caused by failures in the installation environment even
during the warranty period.
Always be sure to ask a qualified technician to carry out
set-up.
Small parts can present choking hazard if accidentally
swallowed. Keep small parts away from young children.
Discard unneeded small parts and other objects,
including packaging materials and plastic bags/sheets to
prevent them from being played with by young children,
creating the potential risk of suffocation.
Do not place the Display on sloped or unstable
surfaces, and ensure that the Display does not hang
over the edge of the base.
The Display may fall off or tip over.
•
Install this unit at a location with minimal vibration
and which can support the weight of the unit.
Dropping or falling of the unit may cause injury or
•
malfunction.
5
English