Opening The Units; About Opening The Units; To Open The Outdoor Unit; Mounting The Outdoor Unit - Daikin ARXF20C5V1B Installer's Reference Manual

6 | Unit installation

6.2 Opening the units

6.2.1 About opening the units

6.2.2 To open the outdoor unit

6.3 Mounting the outdoor unit

6.3.1 About mounting the outdoor unit

Installer reference guide
26
At certain times, you have to open the unit. Example:
▪ When connecting the refrigerant piping
▪ When connecting the electrical wiring
▪ When maintaining or servicing the unit
DANGER: RISK OF ELECTROCUTION
Do NOT leave the unit unattended when the service cover is removed.
DANGER: RISK OF ELECTROCUTION
DANGER: RISK OF BURNING/SCALDING
When
The outdoor and indoor unit must be mounted before the refrigerant piping can be
connected.
Typical workflow
Mounting the outdoor unit typically consists of the following stages:
1 Providing the installation structure.
2 Installing the outdoor unit.
3 Providing drainage.
4 Preventing the unit from falling over.
5 Protecting the unit against snow and wind by installing a snow cover and baffle
plates. See "6.1 Preparing the installation
1×
2
1
2
4
site" [ 22].
(A)RXF20~42C5V1B
R32 split series
4P519439-10J – 2021.06