Disassembly and Reassembly
No
Parts
2
CONTROL-IN
(Continues)
310
Procedure
3) Rotate CASE PCB 90 degrees as shown in
figures.
(Watch out for damage of hinge in CASE PCB)
4) Separate Fan Moter wire as shown in figures.
Caution:
When you separate the connector, pull pressing
the locking button.
5) Separate Blade Moter wire as shown in figures.
Caution:
When you separate the connector, pull pressing
the locking button.
6) Cut off the Cable Tie tied up wires.
Remark
Samsung Electronics