Disassembly and Reassembly
No
Parts
1
CABINET
294
Procedure
10) Loosen the CONDUIT from ASSY CONTROL
COOLER IN lower part and then separate the
TEMP SENSOR.
11) Loosen the CONDUIT from ASSY CONTROL
COOLER IN lower part and then separate the
TEMP SENSOR.
12) Replace of REACTOR and FAN is available
after remove the ASSY CABI LF.
13) When need CONDUIT control for tempera-
ture sensor : Remove the 4 screws in ASSY
CONTROL COOLER side.
Remark
Samsung Electronics