Samsung AM056FN2DEH Series Service Manual page 176

Disassembly and Reassembly
No Parts
3 Auto lift
Panel Kit
(Model name :
PC4NUX*AN)
(Continues)
176
Procedure
9) Loosen the screws and separate the wire-
Guide and grill.
(A total of 4 locations, Using + Screw Driver.)
10) Remove the Case Control Upper by loosening
the 4 screws. (Using + Screw Driver.)
11) Hang the wire on the Roller as shown on the
right. After that, connect Spring Etc-Wire and
Wire as before disassembling.
※ Put the wire on the roller exactly at the
groove.
Remark
Samsung Electronics