Setting Date And Time - Panasonic NV-MX500 Operating Instructions Manual

≥The settings information may not be displayed properly if
the camera data of this Movie Camera are played back on
other equipment.
≥The camera data will not be recorded in the following
cases:
≥When the data are recorded from a card to a tape.
≥When recording proceeds with no input signals
supplied.
≥When recording involves the use of the S-Video or AV
Input Socket.
≥When pictures with no camera data are recorded using
the DV Terminal.
≥When displaying a list of titles.
≥All of the other items on the [DISPLAY SETUP] Sub-Menu
are the same as those on the [DISPLAY SETUP]
Sub-Menu of the [CAMERA FUNCTIONS] Main-Menu.
8) [OTHER FUNCTIONS]
Other Functions Sub-Menu
[REMOTE]
Remote Controller Mode
-7-
[CLOCK SET]
Date and Time Setting
-13-
ª [CARD FUNCTIONS]
Card Playback Mode Main-Menu
CARD FUNCTIONS
1.ERASE CARD FILE
2.CARD EDITING
3.DISPLAY SETUP
4.OTHER FUNCTIONS
PRESS MENU TO EXIT
1) [ERASE CARD FILE]
Erasing a File Sub-Menu
[ERASE FILE BY SELECTION]
Selecting and Erasing a File
[ERASE ALL FILES]
Erasing All Files
-37-
[ERASE TITLE BY SELECTION]
Selecting and Erasing a Title
2) [CARD EDITING]
Editing a File Sub-Menu
[RECORD TO TAPE]
Recording to Tape
-35-
[FILE SEARCH]
Searching a File
-34-
[FILE LOCK]
Setting the Lock
-37-
[SLIDE SHOW]
Setting a Slide Show
-35-
[DPOF SETTING]
Setting DPOF
-38-
[CARD FORMAT]
Formatting a Card
-37-
3) [DISPLAY SETUP]
Display Setup Sub-Menu
≥All of the items on the [DISPLAY SETUP] Sub-Menu are
the same as those on the [DISPLAY SETUP] Sub-Menu of
the [CAMERA FUNCTIONS] Main-Menu.
4) [OTHER FUNCTIONS]
Other Functions Sub-Menu
[REMOTE]
Remote Controller Mode
-7-
[CLOCK SET]
Date and Time Setting
-13-
[VOICE POWER SAVE]
Voice Power Save
-47-
-37-
-37-
Before Use
Short-Cut Menus of the Card Playback Mode
If you use the Short-Cut Menu, the Card Playback Mode
Menu can be called up quickly. Press the [PUSH] Dial to
display the Short-Cut Menu, and turn the [PUSH] Dial to
select the desired Menu.
[FILE SEARCH]
The [FILE SEARCH] Menu for finding files by number
appears. ( )
-34-
[ERASE FILE]
The [ERASE FILE] Menu for erasing the file being displayed
appears. ( ) Use this Menu after the file to be erased
-37-
appears.
[FILE LOCK]
The [FILE LOCK] Menu for avoiding accidental erasure of
files (Lock Setting) being displayed appears. (
Menu after the file to be locked appears.
[DPOF SETTING]
The [DPOF SETTING] Menu for setting DPOF to the file
displayed appears. (
DPOF Setting appears.
[EXIT]
It is for terminating the Short-Cut Menu.

Setting Date and Time

Since the internal clock of the Movie Camera has a slight
imprecision, make sure to check the time before recording.
(26)
(51)
1
Set [OTHER FUNCTIONS] >> [CLOCK SET] >> [YES].
2
Press the [PUSH] Dial
[YEAR]/[MONTH]/[DAY]/[HOUR]/[MIN.] and turn to set
it to a desired value.
≥Year will cycle in the order shown below.
2000, 2001, ..., 2089, 2000, ...
3
Press the [MENU] Button
and time.
≥The clock operation starts from [00] second.
≥The Menu will disappear when the [MENU] Button is
pressed again.
≥If the built-in battery is weak, the [0] Indication flashes. In
this case, charge the built-in battery.
≥The clock employs the 24-hour system.
-13-
FILE SEARCH
ERASE FILE
FILE LOCK
DPOF SETTING
EXIT
) Use this Menu after the file for
-37-
SHUTTER/IRIS/
VOL/JOG
PUSH
CLOCK SET
YEAR 2002
MONTH 10
DAY 08
HOUR 14
MIN. 30
PRESS MENU TO RETURN
(26) to select
(51) to finish setting the date
) Use this
-37-