Tools and Materials Needed
Hammer
Hole Saw
Pipe Wrench
Adjustable Wrench
Tape Measure
Slot Screwdriver
Phillips Screwdriver
Torx T-20 Screwdriver
Level
Wire Cutter
Wire Stripper
Ø 2 mm (
/
in) Drill
1
16
Electrical Supply Cable - Minimum #14 AWG, 2 conductor, 1
ground, insulated copper conductors rated 75°C or higher
Hot Water Supply Line - Minimum
/
" O.D. copper tubing or metal
3
8
braided dishwasher supply line
Shut-off valve and fittings appropriate for hot water supply line
(copper tubing/compression fitting, or braided hose)
UL listed conduit connector or strain relief is required if you attach
the field wiring directly to the terminal block
4
4