Table of Contents
Advertisement
Inspect the Dishwasher
After unpacking the dishwasher and prior to installation,
thoroughly inspect the dishwasher for possible freight
or cosmetic damage. Report any damage immediately.
Cosmetic defects must be reported within 30 days of
installation.
NOTE: Do not discard any bags or items that come with the
original package until after the entire installation has been
completed.
Hammer
Tape Measure
Wire Cutter
Tools and Materials Needed
Hole Saw
Slot Screwdriver
Wire Stripper
Electrical Supply Cable - Minimum #14 AWG, 2 conductor, 1
ground, insulated copper conductors rated 75°C or higher
Hot Water Supply Line - Minimum
braided dishwasher supply line
Shut-off valve and fittings appropriate for hot water supply line
(copper tubing/compression fitting, or braided hose)
UL listed conduit connector or strain relief is required if you attach
the field wiring directly to the terminal block
Pipe Wrench
Phillips Screwdriver
Ø 2 mm (
/
in) Drill
1
16
/
" O.D. copper tubing or metal
3
8
Adjustable Wrench
Torx T-20 Screwdriver
Level
5
5
Advertisement
Table of Contents
