Table of Contents
Advertisement
After switching on the appliance, wait
at least 2 minutes until internal
device initialisation is complete. Only
then should you set up Home Con-
nect.
Connecting appliance to WLAN
¡
home network (Wi-Fi) with WPS
function → Page 17
Connecting appliance to WLAN
¡
home network (Wi-Fi) without WPS
function → Page 17
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tips
Please consult the documents sup-
¡
plied by Home Connect.
Please also follow the instructions
¡
in the Home Connect app.
Notes
Please note the safety precautions
¡
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the Home Connect app.
→ "Safety", Page 4
Operating the appliance on the ap-
¡
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
10.1 Connecting the appli-
ance to a WLAN home
network (Wi-Fi) with
WPS function
If your router has a WPS function,
you can connect the appliance to
your WLAN home network (Wi-Fi)
automatically.
Press .
1.
The temperature display shows
a
Press
repeatedly until the tem-
2.
perature display shows
3.
a
4.
a
5.
6.
10.2 Connecting the appli-
If your router does not have a WPS
function, you can connect the appli-
ance to your WLAN home network
(Wi-Fi) manually. The appliance
briefly sets up its own WLAN net-
work. You can connect a mobile
device to the WLAN network and
transfer the network information for
the WLAN home network (Wi-Fi) to
your appliance.
Requirement: The Home Con-
nect app has been installed on your
.
mobile device.
.
Press
.
The temperature display shows an
animation for two minutes. The ap-
pliance is ready for automatic con-
nection to the WLAN home net-
work (WiFi).
Activate the WPS function on the
router during this period.
To do this, take note of the inform-
ation in the documents for your
router.
Once successfully connected,
flashes in the temperature display.
If the temperature display shows
, the appliance was unable to es-
tablish a connection to the WLAN
home network (WiFi).
Check whether the appliance is
‒
located within the range of the
WLAN home network (Wi-Fi).
Repeat the process or establish
‒
the connection manually
→ Page 17.
Connect the appliance to the
Home Connect app. → Page 18
ance to a WLAN home
network (Wi-Fi) without
WPS function
Home Connect en
17
Advertisement
Table of Contents
