en Table of contents e n User manual Setting the temperature unit S afety instructions Setting the language About these instructions Resetting to factory settings Risk of explosion Switching demo mode on or off Risk of electric shock Rest mode Risk of cold burns Automatic door opening Risk of injury...
Page 3
Customer Service, product / production number and technical data Appliance self-test Obtaining advice and ordering repairs if a fault occurs...
Safety instructions Safety instructions Do not use multi-outlet power strips, ▯ extension leads or adapters. Have the appliance repaired by the T his appliance complies with the relevant ▯ S a f e t y i n s t r u c t i o n s manufacturer, Customer Service or a safety regulations for electrical appliances and similarly qualified person only.
Safety instructions Fire hazard Risk of suffocation Portable multi-outlet power strips or If the appliance features a lock: keep the ▯ power supplies may overheat, causing a fire. key out of the reach of children. Never leave portable multi-outlet power strips Keep children away from the packaging ▯...
Intended use I ntended use G reen living P ackaging U se this appliance I n t e n d e d u s e G r e e n l i v i n g ▯ only for freezing food, making ice and dispensing All materials are environmentally safe and recyclable: drinking water.
Installation and connection Permitted room temperature Installation and connection The permitted room temperature depends on the climate class of the appliance. S cope of supply Information on the climate class can be found on the I n s t a l l a t i o n a n d c o n n e c t i o n rating plate.
Installation and connection Tips for saving energy If you follow the instructions below, your appliance will use less power. Note: The arrangement of the features does not affect the energy consumption of the appliance. Installing the appliance Keep the appliance out of direct sunlight. The appliance needs to cool less frequently at low ambient temperatures and therefore consumes less power.
Installation and connection Before using the appliance for the Electrical connection first time Caution! Do not connect the appliance to electronic energy saver Remove information material, adhesive tape and plugs. protective film. Clean the appliance. Note: You can connect the appliance to mains- "Cleaning"...
Getting to know your appliance G etting to know your appliance Controls G e t t i n g t o k n o w y o u r a p p l i a n c e Touch fields There are sensors under the touch fields.
Getting to know your appliance Ice and water dispenser Basic settings menu To access the Basic settings menu: Press the à button. Press the B button to move to the menu item Basic settings. ™ Open the menu using the button.
Getting to know your appliance Features ▯ Place the container on the telescopic rails and push into the appliance until it engages. Shelf You can remove and adjust the shelf: Ice pack In the event of a power failure or a fault: Lift shelf and remove.
Page 13
Getting to know your appliance Filter cartridge with bypass Turn the filter cartridge with bypass clockwise to the marking. The supplied filter cartridge with bypass filters large Note: particles out of the drinking water, but not bacteria or microbes. If you do not turn the filter cartridge with bypass far enough, water will leak out, causing damage.
Page 14
Getting to know your appliance Changing the filter cartridge with bypass or replacing it When installing a water filter: switch the water filter with a water filter counter on. "Reset water filter counter" on page 16 The filter cartridge with bypass can be kept in the appliance permanently;...
Operating the appliance Setting the temperature O perating the appliance Recommended temperature S witching on the appliance O p e r a t i n g t h e a p p l i a n c e Freezer compartment: –18 °C Press the main On/Off switch.
Operating the appliance ™ Switching ice cube production on or Press button to confirm and confirm the query ™ again with button. Note: Caution! If you cancel the query or take longer than 10 seconds Damage to the appliance! to make an input, the water filter counter will not be reset.
Operating the appliance Setting the touch field colour Setting the signal tone volume You can adjust the volume level of the signal tones Press à button to open the main menu. generated e.g. with alarms. Press B button to move to the menu item Basic Press à...
Operating the appliance Ice and water dispenser light Press button to exit the menu. Use this function to set how long the light will illuminate the ice and water dispenser. Setting the language Press à button to open the main menu. Setting ice and water dispenser light Press B button to move to the menu item Basic Press à...
Operating the appliance Rest mode Caution! Repeatedly closing the door too early will cause The appliance switches off the following: automatic door opening to fail or wear out. Do not close the door as long as automatic door ▯ Automatic door opening opening is still moved out.
Alarm Home network A larm You can use this function to establish a connection between the refrigerator and your mobile device. D oor alarm "Home Connect" on page 21 A l a r m If the appliance door is open for a long time, the door alarm switches on.
Home Connect Connecting the refrigerator to the Customer Service access Home Connect app If you contact Customer Service, they can access your appliance and view its status after you have given your Use this menu to connect your refrigerator to mobile consent.
Information on data protection Declaration of Conformity The first time your Home Connect appliance is Gaggenau Hausgeräte GmbH hereby declares that the registered on a WLAN home network connected to the appliance with Home Connect functionality meets the Internet (Wi-Fi), your appliance will transmit the...
Freezer compartment Fully utilising the freezer volume F reezer compartment To fit the maximum amount of frozen food into the freezer compartment: T he freezer compartment is suitable for: F r e e z e r c o m p a r t m e n t ▯...
Freezer compartment Freezing fresh food Suitable packaging: ▯ Plastic film Freeze only fresh and undamaged food. ▯ Tubular film made of polyethylene (PE) Food which is boiled, fried or baked is more suitable for ▯ Aluminium foil freezing than food which is raw. ▯...
Ice and water dispenser Information on operation of the ice I ce and water dispenser maker Ice cube production starts as soon as the freezer Y ou can use the ice and water dispenser to dispense: compartment has reached the set temperature. I c e a n d w a t e r d i s p e n s e r ▯...
Defrosting Care instructions for stainless steel Defrosting surfaces When taking care of and cleaning stainless steel F reezer compartment surfaces, use only cleaning agents that are suitable for D e f r o s t i n g stainless steel and a stainless steel cleaning cloth. The fully automatic NoFrost system ensures that the freezer compartment remains free of ice.
Cleaning Cleaning the equipment Drip tray You can remove the drip tray to clean. To clean, take the variable parts out of the appliance. "Features" on page 12 Remove the drip grate. Remove the drip tray. Ice cube container Empty and clean the drip tray with lukewarm water. Caution! Re-insert the drip tray and the drip grate.
Noises N oises L ighting > N ormal noises Y our appliance features a maintenance-free LED light. N o i s e s L i g h t i n g Droning: A motor is running, e.g. refrigerating unit, fan. Only Customer Service or authorised technicians may repair the light.
What to do in the event of a fault W hat to do in the event of a fault B efore you call Customer Service, use this table to check whether you can rectify the fault yourself. W h a t t o d o i n t h e e v e n t o f a f a u l t Appliance Temperature differs greatly from the set value.
What to do in the event of a fault Ice and water dispenser Ice is being produced and dispensed but no water. Fault with the appliance. Call customer service. Ice and water dispenser not working. Controls for ice and water dispenser are locked (child lock). Unlock controls for ice and water dispenser.
Page 32
What to do in the event of a fault Too few or deformed ice cubes, water pressure lower than usual. After switching on or removing many ice cubes, there will be It takes around 24 hours for an empty ice cube container to fill too few in the ice cube container.
Page 33
What to do in the event of a fault Product number (E-Nr.) and production number (FD) Customer Service, product / The product number (E-Nr.) and the production number production number and technical data (FD) can be found on the rating plate of the appliance. Make a note of your appliance's details and the Customer Service telephone number to find them again quickly.