Alarm; Door Alarm; Home Connect; Connecting The Appliance To A Wlan Home Network (Wi-Fi) With Wps Function - Gaggenau RT289200 User Manual

Alarm

Alarm
Your appliance is equipped with
Alarm
alarm functions.

Door alarm

If the appliance door is open for a
longer period, the door alarm
switches on.
Switching off the warning tone
(door alarm)
Close the appliance door or press
▶
.
The warning tone is switched off.
a
Home Connect
Home Connect
This appliance is network-capable.
Home Connect
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
To be able to use Home Connect,
you must first set up the connection
to the WLAN home network (Wi-Fi
and to the Home Connect app.
After switching on the appliance, wait
at least 2 minutes until internal
device initialisation is complete. Only
then should you set up Home Con-
nect.
"Connecting appliance to WLAN
¡
home network (Wi-Fi) with WPS
function" → Page 19
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
"Connecting appliance to WLAN
¡
home network (Wi-Fi) without WPS
function" → Page 20
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tips
Please consult the documents sup-
¡
plied by Home Connect.
Please also follow the instructions
¡
in the Home Connect app.
Notes
Please note the safety precautions
¡
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the Home Connect app.
→ "Safety", Page 7
Operating the appliance on the ap-
¡
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
Connecting the appliance to a
WLAN home network (Wi-Fi)
with WPS function
If your router has a WPS function,
you can connect the appliance to
your WLAN home network (Wi-Fi)
automatically.
1
)
Press .
1.
The temperature display shows
a
Press
2.
perature display shows
Press
3.
The temperature display shows an
a
animation for two minutes. The ap-
pliance is ready for automatic con-
nection to the WLAN home net-
work (WiFi).
repeatedly until the tem-
.
Alarm en
.
.
19