Home Connect; Setting Up The Home Connect App - Gaggenau RF 287 Information For Use

en Home Connect
The temperature alarm can be
switched on in the following cases:
The appliance is switched on.
¡
Do not store any food until the ap-
pliance has reached the set tem-
perature.
Large quantities of fresh food are
¡
being placed inside.
Switch on Fast freezing before pla-
cing large quantities of food in the
appliance.
The freezer compartment door is
¡
open for too long.
Check whether the frozen food has
defrosted or thawed.
Switching off the temperature
alarm
Press .
▶
The warning tone is switched off.
a
From this time on, the warmest
a
temperature is measured again
and saved.
lights up until the set temperat-
a
ure is reached again.
Home Connect
10 Home Connect
This appliance is network-capable.
Home Connect
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
To be able to use Home Connect,
you must first set up the connection
to the WLAN home network (Wi-Fi
and to the Home Connect app.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
42
After switching on the appliance, wait
at least 2 minutes until internal
device initialisation is complete. Only
then should you set up Home Con-
nect.
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tips
Please consult the documents sup-
¡
plied by Home Connect.
Please also follow the instructions
¡
in the Home Connect app.
Notes
Please note the safety precautions
¡
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the Home Connect app.
→ "Safety", Page 31
Operating the appliance on the ap-
¡
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
10.1 Setting up the
Home Connect app
Install the Home Connect app on
1.
your mobile device.
Start the Home Connect app and
2.
set up access for Home Connect.
The Home Connect app guides
you through the entire login pro-
cess.
1
)