Before Operating - Panasonic KX-TD816C User Manual

Station Features and Operation (DPT/SLT)

4.1 Before Operating

4.1.1 Before Operating
What kind of telephone do you use?
In this manual, you will find your way to operate the feature depending on the telephone you
use. Please use the proper operation for your telephone.
If you use a Panasonic proprietary telephone which has the special function button and/or
the display, you will follow the operation with the button or display for easy access.
• If you use a Panasonic proprietary telephone which does not have the function button,
you may change one of the unused buttons to another button. Refer to 2.2 Station
Programming.
• A Panasonic proprietary telephone has the Light Emitting Diode (LED) button
indicators, so you can see the line conditions by the lighting patterns.
• If "Idle Line Preference — Outgoing", "No Line Preference — Outgoing" or "Prime
Line Preference (CO Line) — Outgoing" is assigned on the extension, it is not possible
to have access to any DPT features after simply going off-hook. To access DPT features,
press the INTERCOM button after going off-hook.
If you use single line devices such as a single line telephone or data terminal, you will follow
the steps which enter the feature number.
• If you use a dial pulse (DP) type single line device which does not have the " " and "#"
keys, it is impossible to access features that have " " or "#" in their feature numbers.
• When the "Pickup Dialing (Hot Line)" feature is set on your telephone, the dialing
sequence should be done within a certain period of time (Pickup Dial Waiting Time —
default: 1 s) after lifting the handset.
This time can be changed by System Programming.
If you use a ISDN telephone which are connected to the optional ISDN Line Unit, KX-
TD284, can perform features in this section. However, there are some exceptions.
94 User Manual