Table of Contents
Advertisement
2.1
Detaching the arm/stand
(for VESA wall mount)
The detachable stand of the VS228/VS238/VS247 Series LCD monitor is
specially designed for VESA wall mount.
To detach the arm/stand:
1.
Pull the stop lever and turn anticlockwise to unlock.
2.
Detach the base from the monitor.
3.
Use your fingers gently pull away the plate that covers the stand
neck. Use a screwdriver to remove the four screws that secure the
stand to the monitor.
4.
Detach the stand from the monitor.
• W e recommend that you cover the table surface with soft cloth to
• H old the stand of the monitor while removing the screws.
2
4
• The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/
2-1
prevent damage to the monitor.
1
load according to the model listed in the specification table (Screw
size: M4 x 10 mm).
3
5
Chapter 2: Setup
Advertisement
Table of Contents
