Table of Contents
Advertisement
Removing metal grease filter
Open the lock and fold down the metal grease filter.
1.
While doing this, place the other hand under the
metal grease filter.
Take the metal grease filter out of the holder.
2.
For edge extraction filters, pull the metal grease filter
downwards. While doing this, place the other hand
under the metal grease filter.
For additional filters, open the lock and fold down
the metal grease filter. While doing this, place the
other hand under the metal grease filter.
Notes
– Grease can accumulate in the bottom of the
metal grease filter.
– Hold the metal grease filter level, otherwise
grease will drip out.
Clean the metal grease filter.
3.
Installing the metal mesh grease filter
Insert the metal mesh grease filter.
1.
While doing this, place the other hand under the
metal mesh grease filter.
Fold the metal mesh grease filter upwards, locking it
2.
in place.
3Trouble shooting
Malfunctions often have simple explanations. Please
T r o u b l e s h o o t i n g
read the following notes before calling the after-sales
service.
:
Warning
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the
appliance is defective, unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.
Malfunction table
Problem
Possible cause
The appliance
The plug is not
does not work
plugged in.
Power cut
Faulty fuse
The lighting does
The bulbs are
not work.
faulty.
--------
Replacing bulbs
These instructions apply to several appliance variants. It
is possible that individual features are described which
do not apply to your appliance.
:
Warning
Risk of electric shock!
When changing the bulbs, the bulb socket contacts are
live. Before changing the bulb, unplug the appliance
from the mains or switch off the circuit breaker in the
fuse box.
Important Only use a bulb of the same type and same
power (see the bulb holder or rating plate inside the
appliance) – to do this, remove the metal mesh grease
filter.
Replacing halogen bulbs
When inserting halogen bulbs, do not touch the
Note:
glass tube. Use a clean cloth to insert the halogen
bulbs.
Carefully remove the bulb ring using a suitable tool.
1.
Pull out the bulb and replace it with a bulb of the
2.
same type.
Insert the bulb cover.
3.
Insert the mains plug or switch on the fuse again.
4.
LED lights
Defective LED lights may be replaced by the
manufacturer, their customer service or a qualified
technician (electrician) only.
:
Warning
Risk of injury!
The light emitted by LED lights is very dazzling, and can
damage the eyes (risk group 1). Do not look directly
into the switched on LED lights for longer than 100
seconds.
Trouble shooting en
Solution
Connect the appliance to the
electricity supply
Check whether other kitchen
appliances are working
Check in the fuse box to make
sure that the fuse for the
appliance is OK
For information on changing
the bulbs, see the "Replacing
Bulbs" section.
9
Advertisement
Table of Contents
