Specifications - Philips HF3671/01 Manual

Problem
I am unable to turn the
Midnight Light function
on/off.
I am unable to stream
music via USB.
The aux inlet doesn't
work properly.
Suddenly the appliance
makes a beeping sound.

Specifications

Model
Rated input voltage adapter
Rated input frequency adapter
No-load power adapter
Rated output voltage adapter
Rated output power adapter
Average Standby Power appliance
(Conditions: all functions suspended, ambient
light scenario: day 12h 300 lux, night 12h 0lux)
USB charging port
AUX sensitivity
Nominal light output (level 1 - 25)
Nominal light color (level 1 - 25)
Physical characteristics
Dimensions (height x width x depth)
Weight main unit / adapter
Cord length adapter
Classification
Solution
Make sure you tap on the correct position (top/back) of the appliance.
The USB connection is only for charging your mobile phone. You are not
able to stream music to the connected Sleep & Wake-Up Light.
Try to set the volume on your smartphone either higher or lower. If
necessary, adjust the volume level on the appliance as well.
The backup alarm went off. This can happen up to 8 hours after the power
was removed and a set alarm time is due. The alarm sound stops
automatically after approximately 1 minute. You also can stop the alarm
sound immediately if you power up the appliance for a brief moment.
To prevent the back-up alarm from going off when the power is removed
(e.g. storage) disable the alarms prior to powering down.
HF367X
100-240V AC
50/60Hz
<0.1W
24V DC
18W
-
Wi-Fi on and display at maximum brightness
< 2W
-
Wi-Fi off and display maximum brightness
< 1W
-
Wi-Fi off and display at minimum brightness
< 0.5W
5V, 1000mA
280mV
1 - 350 lux at 45cm (1 - 350* lux at 17.7 in.)
depending on model
1500-2800K
22.5 x 22.0 x 12.0cm (8.8 x 8.7 x 4.7in.)
Approx 0.77kg (27.2oz) / 0.14kg (4.9oz)
150cm (4.9ft)
English
23