Specifications - Philips iColor Flex LMX gen2 Product Manual

Specifications

Due to continuous improvements and innovations, specifications may change without notice.
Item Specification
Lumens Per Node
†
On-Axis Candela
Per Node
Output
Luminance Per Node
Viewing Angle
LED Channels
Input Voltage
Electrical
Power Consumption
Interface
Control
Control System
Node Dimensions
(Height x Width x Depth)
Weight
Housing
Lens
Luminaire
Connections
Physical
Temperature Ranges
Humidity
Maximum Luminaires
Per Power/Data
Supply
Certification
Certification
and Safety
Environment
Lumen Maintenance
Threshold Ambient Temperature
§
@ 25° C
L 70
@ 50° C
@ 25° C
L 50
@ 50° C
† Lumen measurement complies with IES LM-79-08 testing procedures.
§ Lxx = xx% lumen maintenance (when light output drops below xx% of initial output). All values are
given at B10, or the median value where 90% of the LED population is better than the reported or
calculated lumen maintenance measurement.
¶ Lumen maintenance figures are based on lifetime prediction graphs supplied by LED source
manufacturers. Whenever possible, figures use measurements that comply with IES LM-80-08 testing
procedures. In accordance with TM-21-11, Reported values represent the interpolated value based on
six times the LM-80-08 total test duration (in hours). Calculated values represent time durations that
exceed six times the total test duration.
4
iColor Flex LMX gen2 Product Guide
Clear Flat Lens Translucent Dome Lens
30 13
11 2.2
17,004 cd/m 3,450 cd/m
2
105° 165°
Red/Green/Blue
24 VDC via sPDS-480ca, PDS-60ca, sPDS-60ca, and CM-150 CA
1 W max. per node at full output, steady state
PDS-60ca 24V (Pre-programmed or DMX/Ethernet)
sPDS-60ca 24V (DMX/Ethernet)
sPDS-480ca 24V (Ethernet)
CM-150 CA (DMX/Ethernet)
Philips Color Kinetics full range of controllers, including Light System Manager, Video System
Manager Pro, iPlayer 3, Antumbra iColor Keypad, and ColorDial Pro, or third-party controllers
31 x 32 x 17 mm 31 x 32 x 28 mm
(1.2 x 1.3 x 0.7 in) (1.2 x 1.3 x 1.1 in)
1.0 kg (2.2 lb) 50-node strand, 4 in on-center node spacing
1.5 kg (3.3 lb) 50-node strand, 12 in on-center node spacing
White or black polycarbonate
Clear UV-protected polycarbonate
Translucent UV-protected polycarbonate
Integrated watertight 3-pin connector
-40 to 50 °C (-40 to 122 °F) Operating
-20 to 50 °C (-4 to 122 °F) Startup
-40 to 80 °C (-40 to 176 °F) Storage
≥ 0 °C (≥ 32 °F) Handling
0 to 95%, non-condensing
PDS-60ca 24V: 1 strand
sPDS-480ca 24V: 8 strands
sPDS-60ca 24V: 1 strand
CM-150 CA: 1 strand
UL/cUL, FCC Class A, CE
Dry/Damp/Wet Location, IP66
Reported Calculated
¶ ¶
60,000 hrs 100,000 hrs
60,000 hrs 100,000 hrs
60,000 hrs 100,000 hrs
60,000 hrs 100,000 hrs
Narrow Beam Lens
28
28.7
41,949 cd/m
2 2
36°
31 x 32 x 27 mm
(1.2 x 1.3 x 1.1 in)