Table of Contents
Advertisement
1
Operating the
appliance
P reparing the appliance
O p e r a t i n g t h e a p p l i a n c e
The appliance was tested before
delivery. To remove residual water from
the test procedure, the first wash cycle
should be run without laundry using the
k Drum Clean programme.
~ "Before washing for the first time"
on page 20
Notes
Never switch on a damaged
■
appliance!
Inform customer service!
■
Insert mains plug.
1.
:
Warning
Risk of death from electric shock!
Risk of death if live parts are
touched.
– Never pull out the mains plug by
tugging the power cord.
– Insert/pull out the mains plug
with dry hands only.
Turn the water tap on.
2.
Open the appliance door.
3.
Operating the appliance
Switching on the appliance/
selecting a programme
Press the # button till the indicator
lamp lights up, release the button. The
appliance is switched on.
The v Cottons programme (only
washing), which is preset at the factory,
is then always displayed.
You can use this programme or select a
different programme.
If you have activated the
Note:
childproof lock, you have to deactivate it
before you can set a
programme.~ "Childproof lock"
on page 42
Presettings and maximum load are
indicated on the Touch-Display for the
selected programme.
Adjusting the selected
programme
Changing default settings
You can use the displayed default
settings or adjust the selected
programme to fit the laundry care needs
~ Page 42 e.g. Temperature, Spin
speed, Finish in time.
en
39
Advertisement
Table of Contents
