Weider WESY19720 User Manual page 16

30. Remove the decals from the decal sheet (not shown) and apply them to the weight system in the locations
shown below.
30
8515
LEG EXTENSION
LEG CURL
31. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in
ADJUSTMENTS, beginning on page 17 of this manual.
Before using the weight system, pull each cable a few times to be sure that the cables move smoothly over
the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the
cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE
DIAGRAM on page 20 of this manual for proper cable routing. If there is any slack in the cables, you
will need to remove it by tightening the cables. See TROUBLESHOOTING AND MAINTENANCE on
page 19.
HIGH PULLEY
LOW PULLEY
16
BUTTERFLY
BENCH PRESS