LG SRSXB2622 Series Owner's Manual page 28

Smart Functions
Installing the LG
ThinQ Application
Connecting to Wi-Fi
Wireless LAN
module
Specifications
FCC Notice
27
• The surrounding wireless environment can make the wireless network service run slowly.
• If the appliance is having trouble connecting to the Wi-Fi network, it may be too far from the
router. Purchase a Wi-Fi repeater (range extender) to improve the Wi-Fi signal strength.
• The network connection may not work properly depending on the Internet service provider.
• The Wi-Fi connection may not connect or may be interrupted because of the home
network environment.
• If the appliance cannot be registered due to problems with the wireless signal
transmission, unplug the appliance and wait about a minute before trying again.
• If the firewall on your wireless router is enabled, disable the firewall or add an exception
to it.
• The wireless network name (SSID) should be a combination of English letters and
numbers. (Do not use special characters.)
• Smartphone user interface (UI) may vary depending on the mobile operating system
(OS) and the manufacturer.
• If the security protocol of the router is set to WEP, network setup may fail. Change the
security protocol (WPA2 is recommended), and register the product again.
Search for the LG ThinQ application from the Google Play Store or Apple App Store
on a smart phone. Follow instructions to download and install the application.
The Wi-Fi button, when used with the LG ThinQ application, allows the refrigerator to
connect to a home Wi-Fi network. The Wi-Fi icon shows the status of the refrigerator's
network connection. The icon illuminates when the refrigerator is connected to the
Wi-Fi network.
Initial Appliance Registration
Run the LG ThinQ application and follow the instructions in the application to register
the appliance.
Re-registering the Appliance or Registering Another User
Press and hold the Wi-Fi button for 3 seconds to temporarily turn it off. Run the LG
ThinQ application and follow the instructions in the application to register the appliance.
Model
Frequency Range
Output Power (Max)
The following notice covers the transmitter module contained in this product.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
LCW-003
2412 to 2462 MHz
< 30 dBm