Smart Functions; Lg Thinq Application - LG SRSXB2622 Series Owner's Manual

LG ThinQ Application

This feature is only available on models with Wi-Fi.
The LG ThinQ application allows you to communicate with the appliance using a
smartphone.
LG ThinQ Energy Monitoring†
This feature keeps track of the refrigerator's power consumption and the number of
Application
door openings.
Features
Remote Control
Control the Refrigerator Temperature, Fresh Air Filter and Ice Plus from the smart
phone app.
Push Messages
If the door remains open for more than ten minutes, you will receive a push
message. When Ice Plus is finished, you will receive a push message.
Smart Diagnosis™
This function provides useful information for diagnosing and solving issues with the
appliance based on the pattern of use.
Settings
Allows you to set various options on the refrigerator and in the application.
† This feature is only available on some models.
NOTE
• If you change your wireless router, Internet service provider, or password, delete
the registered appliance from the LG ThinQ application and register it again.
• This information is current at the time of publication. The application is subject to
change for product improvement purposes without notice to users.
Before Using
1. Use a smartphone to check the strength of the wireless router (Wi-Fi network) near
the appliance.
LG ThinQ
Application
• If the distance between the appliance and the wireless router is too far, the signal
becomes weak. It takes long time to register or fails to install the application.
2. Turn off the Mobile data or Cellular Data on your smartphone.
3. Connect your smartphone to the wireless router.
NOTE
• To verify the Wi-Fi connection, check that Wi-Fi
• The appliance supports 2.4 GHz Wi-Fi networks only. To check your network frequency,
contact your Internet service provider or refer to your wireless router manual.
• LG ThinQ is not responsible for any network connection problems or any faults,
malfunctions, or errors caused by network connection.
26

Smart Functions

icon on the control panel is lit.