Broan E66136BL Installation Instructions Manual page 7

3. PREPARE THE HOOD
F H D
OR ORIZONTAL ISCHARGE
3.7 Turn the hood over and remove the metal shutoff plate from the
back of the hood, by removing its 3 retaining screws. Set the
screws aside.
3.8 Using a straight-blade screwdriver, remove the discharge knock-out. To ease removal, use a long nose pliers for
the third step. See figures below.
Never use a hammer and a screwdriver to punch out the discharge
knock-out, because this will damage the hood internal parts.
1
HR0066
3.9 Press the metal shutoff plate on a flat surface to completely
flatten bent flange.
3.10 Using the 3 screws removed from 3.7, install the metal shutoff plate
on top of the hood.
(CONT'D)
O ( ' ):
NLY CONT D
CAUTION
2
- 7 -
HO0169
HR0067
3
HD0119
HO0036