Bosch DIVAR IP 6000 Series Installation Manual page 37

DIVAR IP 6000 (3U)
2.
3.
4.
5.
6.
Notice!
We recommend using the respective Bosch hard disk drives. The hard disk drives as one of
the critical component are carefully selected by Bosch based on available failure rates. HDD –
not delivered from Bosch – are not supported. Information on supported HDDs can be found
in the datasheet in the Bosch Online Product Catalog.
Bosch Sicherheitssysteme GmbH
Remove the dummy drive from the hard drive carrier and place the hard drive carrier on a
flat surface.
Slide a new hard drive into the hard drive carrier with the printed circuit board side
facing down.
Align the mounting holes in both, the hard drive carrier and the hard drive.
Secure the hard drive to the hard drive carrier using six screws.
1 Hard drive carrier
Replace the hard drive carrier into the chassis bay. Make sure that the hard drive carrier
handle is completely closed.
2
Installation Manual
Maintenance | en
SATA hard drive
37
2016.08 | V2.1 | DOC