Table of Contents
Advertisement
Manual Redialing
Follow the procedure below for manual redialing.
1.
1.
Check that printer is turned on.
2. Press the FAX button.
2.
The Fax standby screen is displayed.
3.
3.
Load documents on platen or in ADF (Auto Document Feeder).
4.
4. Adjust the scan contrast and resolution as necessary.
Setting Items for Sending Faxes
5.
5. Press the Menu/Wireless connect button.
The Fax menu screen is displayed.
6.
6. Select Redial, then press the OK button.
7.
7. Select the recipient's number to redial, then press the OK button.
8.
8. Press the Black button or the Color button.
Important
•
• Color transmission is available only when the recipient's fax device supports color faxing.
Note
•
• For manual redialing, the printer memorizes up to 10 recent recipients dialed by entering the fax/
telephone numbers. Note that the printer does not memorize any recipients dialed using the redial
function or selecting from the directory.
• To cancel manual redialing, press the Stop button. To cancel a fax transmission while it is in
•
progress, press the Stop button, then follow the instructions on the LCD.
•
• If documents remain in the ADF after the Stop button is pressed while scanning is in progress,
Original in ADF [OK]Eject the original is displayed on the LCD. By pressing the OK button, the
remaining documents are automatically ejected.
375
Advertisement
Table of Contents
