Table of Contents
Advertisement
In a menu or settings screen, use the
to proceed with the procedure.
Note
• For details on how to change settings, refer to
•
Network Status Indication
Wi-Fi setting and the network status indicate by the icon.
If the
icon appears on the LCD when the SCAN button or Setup button is pressed, it indicates
that Wi-Fi is enabled and the printer is connected to the wireless router.
Depending on the signal state, the icon will change.
Signal strength: 81 % or more
You can use the printer over Wi-Fi without any problems.
Signal strength: 51 % or more
The problem such as the printer cannot print may occur according to the network status. We
recommend placing the printer near the wireless router.
Signal strength: 50 % or less
The problem such as the printer cannot print may occur. Place the printer near the wireless
router.
Wi-Fi is enabled but the printer is not connected to the wireless router.
Note
• When Wi-Fi is disabled, the
•
button to select an item or option, and then press the OK button
Changing Settings from Operation
icon is not displayed.
164
Panel.
Advertisement
Table of Contents
