Front I/O Bracket - Lenovo 11KC000XGE Hardware Maintenance Manual

Removal steps
CAUTION:
Touch only the edges of the card reader. Do not touch the card reader's circuit board.

Front I/O bracket

Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
For access, do the following:
1. Remove the following parts in order if any:
• "" on page
• "Front bezel" on page 57
• "Drive bay assembly" on page 59
• "Card reader" on page 70
2. Disconnect the power button cable from the system board.
.
Chapter 6 Hardware removal and installation
71