E-Lock - Lenovo 11KC000XGE Hardware Maintenance Manual

Removal steps
Note: After installing a new coin-cell battery, reset the system date and time in the UEFI BIOS menu.

E-lock

Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Note: To remove the screws, you need a special tool (T15 star wrench).
For access, do the following:
1. Remove the computer cover. See "" on page .
2. Disconnect the E-lock cable from the system board.
Removal steps
68
M75t Gen 2 Hardware Maintenance Manual