Table of Contents
Advertisement
4. Remove cooktop burner caps and bases from package
containing parts. Place the burner bases as indicated by the
following illustration for your model:
For Model KSGG700E:
A
B
A. Small (Auxiliary)
C. Medium (Semi Rapid) D. Medium (Semi Rapid)
B. X-Large (Stack)
5. Align the gas tube opening in the burner base with the
orifice holder on the cooktop and the igniter electrode
with the notch in the burner base.
E
A. Burner cap
B. Gas tube opening
C. Burner base
12
D
C
E
E. Large (Ultra Rapid)
A
B
C
D
D. Igniter electrode
E. Orifice holder
6. Place the burner caps on the appropriate burner bases.
IMPORTANT: The bottom of the small and medium caps are
different. Do not put the wrong size burner cap on the burner
base.
SR
AUX
Small cap
Medium cap
(Auxiliary)
(Semi Rapid)
Burner caps should be level when properly positioned. If
burner caps are not properly positioned, surface burners
willnot light. The burner cap should not rock or wobble when
properly aligned.
A. Incorrect
B. Correct
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
7. Plug into a grounded 3 prong outlet.
ST
UR
Large cap
X-Large
(Ultra Rapid)
cap (Stack)
A
B
Advertisement
Table of Contents
