Fitting And Removal Of Base : Prolite P1705S / Prolite P1905S - Iiyama ProLite PB1705S-1 User Manual

FITTING AND REMOVAL OF BASE : ProLite P1705S / ProLite P1905S


Put the monitor on a stable surface. The monitor may cause injury or damage if it
CAUTION
falls or is dropped.

Do not give a strong impact to the monitor. It may cause damage.

Unplug the monitor before removal or installation to avoid electric shock or damage.
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay
the monitor fl at on a table with front face down.
Install the stand-base to the monitor (A) and slide the stand-base to the back of the monitor (B).
<Removal>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay
the monitor fl at on a table with front face down.
Press and hold the hook outside and slide the stand-base to the front of the monitor (C), and pull
the stand-base from the monitor (D).
5 BEFORE YOU OPERATE THE MONITOR
(A)
Stand-Base
(B)
Hook
(D)
(C)