Fitting And Removal Of Base : Prolite Xub2294Hsu / Prolite Xub2294Hs / Prolite Xub2292Hs - Iiyama ProLite XUB2294HSU User Manual

FITTING AND REMOVAL OF BASE :
ProLite XU2294HSU / ProLite XU2294HS / ProLite XU2292HS
 Put the monitor on a stable surface. The monitor may cause injury or damage if it
CAUTION
falls or is dropped.
 Do not give a strong impact to the monitor. It may cause damage.
 Unplug the monitor before removal or installation to avoid an electric shock or a
damage.
<Installation>
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitor flat on a table with front face down.
Hold the monitor and install the Stand-Neck to the
monitor until it clicks and is secure.
Hold the monitor and install the Stand-Base to the
stand-neck until it clicks and is secure.
Place the Cable Holder.*
NOTE
* The cable holder cannot be removed after installation.
<Removal>
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitor flat on a table with front face down.
Keep pressing the hooks inward to pull out the Stand-
Base.
Press the hook on the back of the monitor and remove
the Stand-Neck from the monitor.
8 BEFORE YOU OPERATE THE MONITOR
Hook
Cable Holder
Stand-Neck
Stand-Base
Hooks