Table of Contents
Advertisement
Press the 2 Button. (Auto Image Adjust)
Adjust the image manually by following procedure below when the screen has a fl icker or
blur, or the picture does not fi t in the display area after performing the Auto Image Adjust.
Adjust the V.Position so that the top and bottom of the picture frame will fi t to the display
area.
1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of
the display area.
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the Horizontal Size.
When the left side of the picture frame moves apart from the left edge of the display
NOTE
NOTE
area during the Horizontal Size adjustment, adjust steps 1) and 2).
Another way to make the Horizontal Size adjustment is to correct the vertical wavy
lines in the zebra pattern.
The picture may flicker during the Horizontal Size, H.Position and V.Position
adjustment.
In case the picture frame is bigger or smaller than the data display area after the
Horizontal Size adjustment, repeat steps from
17
OPERATING THE MONITOR
.
Advertisement
Table of Contents
