Security
Setting HP Administrator Passwords
An HP administrator password is set, changed, or deleted in the
Setup utility.
To manage the password:
1. If you are not sure whether the notebook is off or in
hibernation, press the power button. (The notebook turns
on or restores from hibernation.)
2. Display the Setup message.
❏
❏
3. Press
lower-left corner of the screen.
4. Use the arrow keys to select Security > Administrator
Password, and then press
❏
❏
❏
5. To save your preferences and exit the Setup utility, press
and then follow the instructions on the screen.
Your preferences are in effect when the notebook restarts.
12–10
If the notebook is on, restart the notebook through the
operating system.
If you are certain that the notebook is off and not in
hibernation, turn the notebook on.
while the Setup message is displayed in the
f10
To set an HP administrator password, type your password
in the Enter New Password and Confirm New
Password fields, and then press
To change an HP administrator password, type your
current password in the Enter Current Password field,
type the new password in the Enter New Password and
Confirm New Password fields, and then press
To delete an HP administrator password, type your
current password in the Enter Password field, press
3 times, and then press
enter.
enter.
f10.
Hardware and Software Guide
enter.
enter
f10,