CAUTION
Getting Started with Your HP Notebook
Setting Up Your Notebook
Step 2: Connect AC power
Use only the HP AC adapter included with your notebook, or another approved
HP adapter. Using any other AC adapter can damage the adapter, and may void
your warranty—see "Hewlett-Packard Limited Warranty Statement" on page 114.
The pre-installed electronic online manual on your notebook may refer to the use
of a 60-watt AC adapter designed for an earlier released product. A 60-watt AC
adapter should not be used with this current product.
• Plug the AC adapter into the power source (the adapter's LED lights), then connect it
to the AC adapter jack on the back of the notebook. The notebook's battery then
begins charging.
• You must fully charge your battery before first using your notebook. The battery
indicator light will turn green when fully charged.
While the battery is charging, you can continue with step 3.
22
Reference Guide