Machine Operation; Setup And Adjustments - Jet JWBS-14Q-M Operating Instructions Manual

5.2 Mains connection
5.3 Dust connection
5.4 Starting operation

6. Machine operation

Correct working position:
Workpiece handling:
Operating hints:
Blade Drift:
Fig 5
Resaw guide:
Fig 6
Mitre gauge:
For the authorized use of the
machine observe the appendix A
"safe operation"
(on the last pages of this operating
manual)

7. Setup and adjustments

General note:
Setup and adjustment work may
only be carried out after the
machine is protected against
accidental starting by pulling the
mains plug.
7.1 Changing the sawblade