Switch Cover - HP Pavilion DV7-1023 Maintenance And Service Manual

Switch cover

NOTE: The switch cover includes the power button board and cable and LED board and cable.
Description
For use only with computer models equipped with AMD processors
For use only with computer models equipped with Intel processors
Before removing the switch cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the switch cover:
1. Remove the following screws:
(1) Seven Phillips PM2.5×4.0 screws
(2) One Phillips PM2.5×13.0 screw
2. Turn the computer display-side up, with the front toward you.
3. Open the computer as far as possible.
4. Lift the rear edge of the switch cover (1) until it rests at an angle.
Battery on page 54).
Spare part number
480469-001
485605-001
Component replacement procedures 69