Recommended Tools - Omron K8AC-H2 Manual

Dimensions
Digital Heater Element Burnout Detectors
K8AC-H2@@@-FLK
K8AC-H1@@@-FLK

Recommended Tools

Recommended Flat-blade Screwdriver
Manufacturer: Phoenix Contact
Model number: SZF0.4 × 2.5
Crimper for Bar Terminals (Crimping Tool)
Manufacturer: Phoenix Contact
Model number: CRIMPF0X UD6
Recommended power line diameters: AWG10 to AWG24
35 2.1 100
1.7
35 100
Recommended Crimp Terminals
Terminals
1 and 2
3 to 14
Note: Securely tighten the terminal screws to the following torque:
To remove a wire, insert the recom-
mended flat-blade screwdriver
straight into the hole under the screw-
less clamp terminal of the wire, and
simply release the wire.
90
4.5
6
90
Recommended crimp terminals
M3 crimp terminals (Width: 5.8 mm max.)
5.8 mm max.
5.8 mm max.
M2 bar terminals: Al 0.34-8TQ (Phoenix Contact)
M2 bar terminals: Al 0.5-8WH (Phoenix Contact)
M2 bar terminals: Al 0.75-8GY (Phoenix Contact)
Power supply terminals: 0.5 N·m
I/O terminals: 0.23 N·m
K8AC-H
(Unit: mm)
Recom-
mended
wire gauge
AWG16 to
AWG18
AWG22
AWG20
AWG18
19