Hard drive
NOTE:
The hard drive spare part kit includes left and right bracket rails, a connector cable, Mylar cover
with tab, and 4 rubber isolators.
Description
160 GB, 5400 rpm
250 GB, 7200 rpm (select models only)
250 GB, 5400 rpm
320 GB, 7200 rpm (select models only)
320 GB, 5400 rpm
400 GB, 5400 rpm
500 GB, 5400 rpm (select models only)
Hard Drive Hardware Kit (includes left and right bracket rails, connector cable, Mylar cover with
tab, and 4 rubber isolators)
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Remove the hard drive:
1.
Position the computer with the front toward you.
2.
Loosen the two Phillips PM2.5×5.5 captive screws (1) that secure the hard drive bay cover to the
computer.
Battery on page
59).
Spare part number
511873-001
511874-001
511875-001
511876-001
511877-001
511878-001
511879-001
483862-001
Component replacement procedures
69